Table of contents

Classes

• mMuiAddDBEntry Adds a new entry in the MuID database
• mMuiChannelGhitRelModule Constructs (raw channel - GEANT hit) relations
• mMuiClusterFinderModule Groups raw MuID hits into clusters
• mMuiDCMUnpackModule Parses the MuID DCM packet data, and fills the dMuiRaw table for those channels that have signals
• mMuiEndModule Performs end-of-job clean-up tasks for MuID analysis
• mMuiFEMToDCMModule Applies the DCM pass-through algorithm to the FEM reports and reformats the data into DCM packet format
• mMuiFillRawGhitRelModule Refills the dMuiRawGhitRel table using its contents and the contents of dMuiRaw
• mMuiHistoBaseModule Fills some basic histograms
• mMuiInitModule Performs beginning-of-job initializations for MuID reconstruction
• mMuiRawToFEMModule "Packs" MuID raw data in front-end module (FEM) reports
• mMuiReadoutModule Creates a list of struck Iarocci tubes using the ideal PISA GEANT detector information (X,Y,Z,T,dE)
• mMuiRoadFinder Class to construct roads from raw hits or clusters
• mMuiTrigger Class to determine the trigger state from the raw hits
• TMui1DRoad Describes a "one-dimensional" (X-Z) or (Y-Z) road found in the muon identifier
• TMui2DRoad Describes a road found in the muon identifier
• TMuiAddressTable Maps addresses of MuID channels between "hardware" and "software" representations
• TMuiChannelId Contains the "software" representation of a MuID channel address
• TMuiCluster Describes a single cluster of hits in MuID tubes
• TMuiClusterContainer Contains all TMuiCluster objects for a single event
• TMuiContainer A templated container class for MuID objects
• TMuiGeometry Class containing all of the objects necessary to describe the muon identifier geometry
• TMuiHit Corresponds to a single struck two-pack in the muID
• TMuiHitContainer Contains all TMuiHit objects for a single event
• TMuiHitID Contains the five numbers necessary to identify a hit uniquely: arm, plane (gap), panel, orientation, and hit within panel
• TMuiPanelGeo Describes a single panel of (both horizontal and vertical) Iarocci tubes in the muon identifier system
• TMuiReadoutID Contains the "hardware" representation of a MuID channel address
• TMuiRoad Describes a road found in the muon identifier
• TMuiTubeGeo Describes a single Iarocci tube in the muon identifier system
• TMuiTwoPackGeo Describes a single two-pack in the muon identifier system
• TMuiWeightFunc Base class for calculating fit weights for the road finder
• TMuiWindowFunc Base class for calculating the search window size for the road finder

Functions, Macros

• HitHash Returns the position of a TMuiHitID object in the PanelHit hash table.
• HitPanelHash Returns the position of a TMuiHitID object in the PanelHitCount hash table.
• mMuiClusterEval_ Cluster-finder evaluator module
• mMuiFillClusterFkinRel_ Fills the relational table that maps clusters of raw muID hits (dMuiClusters table) to GEANT tracks (fkin table)
• mMuiFillRawFkinRel_ Fills the relational table that maps raw hits (dMuiRaw table) to GEANT tracks (fkin table)
• mMuiFillRoadFkinRel_ Fills the relational table that maps recognized MuID roads (dMuiRoads table) to GEANT tracks (fkin table)
• mMuiFillRoadRawRel_ "Joins" the dMuiClusterRawRel and dMuiRoadClusterRel tables; the resulting dMuiRoadRawRel table shows which raw hits are attached to each road
• mMuiGhitFilter_ Makes selections on GEANT hits to process
• mMuiMuonId_ Determines whether the MuTr-MuID tracks that have been found in this event are or are not muons
• mMuiRoadEval_ Road-finder evaluator module
• mMuiSelectEvent_ Determines whether the current event should be processed, based on the presence or absence of hits in the MuID planes
• operator << Print TMuiReadoutID information to a stream.
• operator << Print TMuiClusterContainer information to a stream.
• operator << Print TMuiTwoPackGeo information to a stream.
• operator << Print TMuiChannelId information to a stream.
• operator << Print TMuiCluster information to a stream.
• operator << Print a TMuiHitID hit identifier to a stream.
• operator << Print TMuiGeometry information to a stream.
• operator << Print TMuiPanelGeo information to a stream.
• PanelHash Return the position of a TMuiChannelId object in the PanelGeo hash table.
• TwoPackHash Return the position of a TMuiChannelId object in the TwoPackGeo hash table.

Enums, Unions, Structs

• dMuiClusterControl Parameters controlling the operation of the MuID cluster finder
• dMuiClusterEvalCtrl Parameters controlling the operation of the cluster-finder evaluator
• dMuiClusterFkinRel Relational table matching clusters (dMuiClusters table) to the GEANT tracks (fkin table) that produced the raw hits contained in the clusters
• dMuiClusterRawRel Relational table mapping raw hits (dMuiRaw table) to the clusters (dMuiCluster table) that contain them
• dMuiClusters Clusters of raw MuID hits, found by mMuiClusterFinder_
• dMuiDCM Table produced by mMuiFEMToDCM_, which applies the DCM pass-through algorithm to FEM packet and reformats data into DCM packet format
• dMuiDCMGhitRel dMuiDCMGhitRel

  : Relational table mapping raw hits in DCM format (dMuiDCM table) to : the GEANT hits (munhits table) that produced them

• dMuiEventControl Parameters controlling the operation of the mMuiSelectEvent_ module
• dMuiFEM Table produced by mMuiRawToFEM_ which turns input dMuiRaw data into the data content sent from the FEM to the DCM
• dMuiFEMConfig Contains the mapping between software ID (gap,panel,twopack) and hardware ID (ROC,word,channel) for MuID two-packs of a given arm and orientation
• dMuiFEMGhitRel Relational table mapping raw hits in FEM format (dMuiFEM table) to the GEANT hits (munhits table) that produced them
• dMuiFkinRawRel Relational table mapping raw hits (dMuiRaw table) to the GEANT tracks (fkin table) that produced them
• dMuiInternalGeo Contains the data necessary to determine positions of individual two-packs within a panel
• dMuiMuonIdProfilePar Parameters for the "profile cut" (or "sequential cuts") option of the MuID muon identifier module
• dMuiRaw Contains raw data from muon identifier tubes
• dMuiRawGhitRel Relational table mapping raw hits (dMuiRaw table) to the GEANT hits (munhits table) that produced them
• dMuiReadoutControl Parameters controlling the readout simulation
• dMuiRoadClusterRel Relational table mapping clusters (dMuiClusters table) to roads (dMuiRoads table)
• dMuiRoadControl Parameters controlling the operation of the MuID road finder
• dMuiRoadEvalControl Parameters controlling the operation of the road-finder evaluator
• dMuiRoadFkinRel Relational table mapping roads (dMuiRoads table) to GEANT tracks (fkin table)
• dMuiRoadRawRel Relational table mapping raw hits (dMuiRaw table) to roads (dMuiRoads table)
• dMuiRoads Roads from the MuID road finder
• dMuiSurveyGeo Specifies MuID panel locations
• dMuiTrigger Stores the state of the MuID local level-1 trigger for one event
• dMuiTriggerControl Table with control parameters for the mMuiTrigger module
• dMuiTriggerDebug Stores the detailed state of the MuID level-1 trigger for debugging
• dMuiUnpackControl Parameters controlling the unpacker
• dMuoTrackRoadRel Table relating MuTr tracks with MuID roads
• EArm_t Constants specifying the arm identifier.
• EOrient_t Constants specifying the two-pack orientation.
• munhits Contains PISA (GEANT) hits data from muon identifier system

this page has been generated automatically by doc++

(c)opyright by Malte Zöckler, Roland Wunderling
contact: doc++@zib.de