DCM_DSP5

class DCM_DSP5 : public DCM

Proxy class for the 5th DSP of the DCB

Inheritance:

Public Methods
DCM_DSP5( const char *name, const char *pud_name, const char* server_name ): Creator - same arguments are DCMs
bool isDsp5(): REturns true if this is a fifth-DSP
bool updatePu( int iStatus, int eState_on_success ): Standard update PU

Public
set and get DCM DSP5 configuration parameters to inhibit configuring

Inherited from DCM:

Public Methods
DCM* castToDCM()
static DCM* createDCM( const char *type, const char *name, const char *pud_name, const char *server_name )
virtual void dump( ostream &os = cout )
static void dump_all( ostream &os = cout )
DCM* getDsp5()
inline void identify( ostream &os = cout )
bool isEnabled( const char* pccTransition = NULL )
static void listAll( ostream &os = cout )
int resetBoard()
int startInitialiseAfterGtmOk()
int startInitialiseFromPar()

Public
Accessor member functions

virtual int configure( const char *cmd, const char *value, const char* aux_param)
Generic configuration command
void setDspCode( const char* dsp_code )
To set the DSP file
void setFpgaCode( const char* fpga_code )
To set the FPGA file
void setFakeData( const char* fake_data_file )
To set the fake data file
pstring getDspCode()
Returns the DSP file
pstring getFpgaCode()
Returns the FPGA code
pstring getFakeData()
Returns the fake data file
void setReadoutMode( const char* pDest )
Sets the destination mode
inline pstring getReadoutMode()
Returns the mode with which we read out the DCMs
Relation to DCBs and FEMs

int install( DCB *pDcb, long iUnit )
To install a DCM in a DCB - returns error if already installed
inline const DCB* getDcb()
To return the DCB
inline long getUnitNb()
Returns which unit we are on the board (1-4)
void addFem( FEM *pFem )
To relate the DCM to the FEM (can be more than 1!)
void setPar( Par *pPar )
To relate to the partition module
state transition functions - to be invoked by the PRST

virtual int connect()
Makes sure that the object is created in VxWorks
virtual int initialise()
Resets the board, loads the DSP and FPGA code
virtual int download()
FE1 does nothing at download time
virtual int start_run()
Checks the GLink lock at SOR
virtual int end_run()
To end the run - does nothing
virtual bool updatePu( int iStatus, int eState_on_success )
Redefined upatePu to steer the object trough the state transition leading to the state eState_on_success

Protected Classes
enum eDcmReadoutModes
enum eToSimulateDcms

Protected Fields
bool bCheckGlinkLockedAtSOR
int iLastCmdSent
long iUnitOnBoard
DCB* myDcb
Par* myPar
static const char* pcDcmReadoutModes[]
pstring psReadoutMode

Protected Methods
int createInVxWorks()
virtual int sendDcmEvent( int iEventId )

Protected
enum eDcmReadoutModes
enum eToSimulateDcms

Inherited from genNamedObj:

Public Methods
static void add( const char *name, X x )
inline static X begin()
inline static X end()
static bool exists( const char *name )
static X get( const char *name )
int getLocation()
inline static int getNbElements()
static X getObject( const char *name )
static int getObjects( const char *name, list<X> &theList )
inline const char* getObjName()
inline static X next()
static void remove( const char *name )

Private Fields
static map < const char*, X, cstring_ordering_t > ::iterator m_It
static map < const char*, X, cstring_ordering_t > m_Map
char* m_Name

Inherited from Pu:

Public
Accessors common to all PU

const char* getPudName()
Returns the name of the Process Unit Design
const char* getPrstName()
Return the name of the process stage, which controls this PU
Prst* getPrst()
Return a pointer to the process stage, which controls this PU
inline void enable()
To set the enable flag of the PU to true
inline void disable()
To set the disable flag of the PU to false
virtual bool isEnabled( const char* pccTransition = NULL )
To find out whether a process unit is enabled
void setSimulate( bool bValue )
To set the simulate mode
void setDebug( bool aBool )
To set the debug mode
bool getDebug()
Returns true if we are in debug mode
Architectural common member functions for all PU

Pu(const char *name, const char *pud_name )
constructor with the name and design as input
virtual ~Pu()
virtual destructor for handling dtor of subtypes
static mapPu_t mapPu
The PUs are organized in a global STL map
static bool exists( const char *name )
Returns true if a PU of this name exists
static mapPu_t::iterator locate( const char *name )
given the name of the PU return an STL map iterator to it
static Pu* get( char *name )
given the name return a pointer to the object itself
static int getPuByTag( const char* pcTag, list<Pu*> &theList )
To get a whole bunch of Pu that start with a given name
virtual void identify( ostream &os = cout )
To print out a one-line identifing message to the ostream os
virtual void dump( ostream &os = cout )
To print out a detailed summary of the Pu to ostream os
static void dump_all( ostream &os = cout )
To print out a detailed summary for all PU to ostream os
static void listAll( ostream &os = cout )
To print out a one-line summary for all PU to ostream os
Simple implementation of RTTI (see note above)

virtual Rdev* castToRdev()
virtual casts to Rdev
virtual Rout* castToRout()
virtual casts to Rout
virtual EvPool* castToEvPool()
virtual casts to EvPool
virtual Swpu* castToSwpu()
virtual casts to Swpu
virtual rcGTM* castToGTM()
virtual casts to GTM
virtual FEM* castToFEM()
virtual casts to FEM
virtual DCM* castToDCM()
virtual casts to DCM
virtual DDsocket* castToDDsocket()
virtual casts to DDsocket
virtual ROobject* castToROobject()
virtual casts to ROobject
virtual ddEventServer* castToddEventServer()
virtual casts to ddEventServer
virtual DataLogger* castToDataLogger()
virtual casts to DataLogger
virtual rcDataLogger* castToRcDataLogger()
virtual casts to rcDataLogger
virtual DummyDevice* castToDummyDevice()
virtual casts to Dummy device
virtual Par* castToPar()
virtual casts to Par
virtual EvbComponent* castToEvbComponent()
virtual casts to EvbComponent
State transitions

enum states
enum with the different possible states - these are common to all PU!!!
static const char* pcStates[]
the names of the state transitions as static const char*
int setState(int state )
Sets the state to the new state given by the enum int
int setState( const char *pcState )
Sets the state to the new state given by the name of the state
int getState()
Returns the state to the new state as enum int
const char* getcState()
Returns the state to the new state as a string
static int setStateAndUpdateStage( const char *pcPuGroup, const char *pcNewState )
Function that searches for a named PU (or group of PUs), sets its STT to the pcNewState and updates the ProcessStage at the same time
virtual functions for generic configuring, starting/updating/continuing a state transition

virtual int configure( const char* config_req, const char* value, const char *param = NULL )
To configure a PU
virtual int connect()
Connect is called once at initialisation time
virtual int initialise()
To initialise the PU
virtual int download()
To download the PU
virtual int start_run()
To start a new run
virtual int end_run()
To stop a run in progress
virtual bool updatePu( int iStatus, int eState_on_success )
Whenever a PU reports to the prst that is has done a state transition, the prst calls this virtual function
virtual bool checkReady( int iLevel )
Returns true if the process unit is in a ready state

Protected Fields
bool bDebug
bool bEnabled
bool bIgnoreErrorOnTransition[ eNStates ]
bool bSimulate
int eState
char* pcName
char* pcPud_name
const char* pcState

Protected Methods
int sendEventPuDone( int eState_on_success )
int updateStateAfterConfigReq( int eNewState = eInitialised )

Private Methods
int setIgnoreErrorOnTransition( const char* pcTransition, bool bValue )

Documentation

Proxy class for the 5th DSP of the DCB. We treat it as a special form of DCM through inheritance to reuse the code to support the corresponding DCM code.
The following things happen at the state transitions:
initialise:
1. Load DSP code
download:
Nothing.
start_run:
Nothing.
end_run:
Nothing.