====================================================
         Important EPICS High Voltage Record Data Base Fields
         ====================================================

The fields are addressed by appending extensions to the channel names.
Fields as CEI are the INPUT fields to EPICS and have to be addressed in 
order to retrieve the current settings as stored in the database.
The same fields but ending on "O" (e.g. CEO) are used to output values 
to the data base and to modify the current settings.

1471N modules:
==============
HV_DC_W_S_KS00_X1__C.CEI      channel enable      1=en.  0=dis.   
HV_DC_W_S_KS00_X1__C.CZI      current dead zone   (uA)
HV_DC_W_S_KS00_X1__C.TCI      trip current        (uA)
HV_DC_W_S_KS00_X1__C.DVI      demand voltage      (V)
HV_DC_W_S_KS00_X1__C.VZI      voltage dead zone   (V)
HV_DC_W_S_KS00_X1__C.RUI      ramp up rate        (V/s)   
HV_DC_W_S_KS00_X1__C.RDI      ramp down rate      (V/s)
HV_DC_W_S_KS00_X1__C.PTCI     peak trip current   (uA)         
HV_DC_W_S_KS00_X1__C.RTI      ramp trip enable    1=en.  0=dis.

1469N modules:
==============
a/ normal channels
HV_DC_W_S_KS00_X1__P.CEI      channel enable      1=en.  0=dis. 
HV_DC_W_S_KS00_X1__P.CZI      current dead zone   (uA)
HV_DC_W_S_KS00_X1__P.TCII     trip current        (uA)

b/ bulk supply channels
HV_DC_W_S_KS00-03_PBS.CEI     channel enable      1=en.  0=dis.
HV_DC_W_S_KS00-03_PBS.CZI     current dead zone   (uA)
HV_DC_W_S_KS00-03_PBS.TCI     trip current        (uA)
HV_DC_W_S_KS00-03_PBS.DVI     demand voltage      (V)
HV_DC_W_S_KS00-03_PBS.VZI     voltage dead zone   (V)
HV_DC_W_S_KS00-03_PBS.RUI     ramp up rate        (V/s) 
HV_DC_W_S_KS00-03_PBS.RDI     ramp down rate      (V/s)