Minutes of the HEBT telephone meeting - Aug. 7, 1998

Attendants:
BNL: Y.Goto, E.Kistenev, N.Saito, H.Torii, S.White, G.Young
Muenster: D.Bucher

* Position detector

DWC, preamp, cables, L.V., etc. will be shipped from Muenster.
Gas is already ordered at CERN.
CFD's 5ch have to be shipped from BNL or found at the CERN electronics
pool.
LRS2228A (long range type) will be checked at ORNL stock.
H.V. 3kV, 1microA, positive, 1ch is necessary.

* Platform

Muenster technician measured available width of the platform is 92cm.
Width of the PbSc SM is 66cm, and that of PbGl 4SM's is 32 (or 48)cm.
We can configure vertically PbSc and PbGl.
It must be decided at CERN how to stack PbSc and PbGl (top or bottom).
Height variation of the stage is 83cm.

* Setup at the fence

We plan to make our setup at the fence.
Length of the SDM board cable is 20m.
Where is the beam trigger logic made ? - Is it given, or do we make
it by ourselves ?
How is the timing ?
Platform control and readout is not available at the fence ?

* Equipments

Dolly's with power supply and serial funout module should be confirmed
at CERN.
Transformer ( > 5kW)is found at CERN.

* Shipping

Aug.14 at BNL
Receiving address is
	Tony Pryzybla, Expt.WA98/ALICE (E-mail: Tony@vxwa80.cern.ch)
	Bat 595 R-031, CERN PPE Division, Geneva CH-1211, Switzerland

* Beam time plan

PbGl people (Muenster) prefer to take energy sum data and 20degree
non-orthogonal data.

* Schedule

Vanessa Mexner		8/23 - 9/?
Henner Buesching	about 1.5 week
Stefan Bathe		about 1.5 week
Ullrich von Poblotzki	about 1.5 week
S.White			8/24 - 9/2
E.Kistenev		8/24 - 9/8
T.Awes			8/24 - ?
Y.Goto			8/18 - 9/7
H.Torii			8/18 - 9/10
N.Saito			8/24 - 9/7

M.Ippolitov is staying all the time.
Meeting at CERN - Aug.25 11AM at 2nd floor of Conf. Bldg.

* Concerns

Beam sharing between PHENIX/ALICE
Platform - crane, align and survey works
Platform - control and readout
Beam trigger logic
HIVOC