Parts for one Glink/Clink Arcnet board
--------------------------------------

1   PC boards (already made, from PC-Express)
2   50-pin connector (must be mounted flat/flush on board)
1   dip switch
1   10k SIP resistor array
1   DB9F right-angle connector
1   3-pin molex connector
2   2-pin molex connector
1   push-button switch
3   5 volt zener diode
6   5 volt LED
1   DS2480B 1-wire micro-lan interface
    (mount in correct direction - see photo)
1   74LS240 octal buffer
4   10k 1/8 watt resistor
1   100k 1/8 watt resistor
5   0.1 microF capacitor
2   10 microF capacitor
1   1 amp PTC fuse
1   EMT103 noise filter
2   4-40 5/16" screws
2   4-40 nuts
1   20-pin IC socket

1   ArcNet daughter card (will be added later by us)