Key to the long calibration cable wiring - MJL 12/12/00
=======================================================

One cable is used for each octant-station for a total of 
24 cables per arm.

Length: South arm - 70 feet, North arm - 110 feet.

The brown Molex connector has the order (as seen from the back of the connector
where the wires come in):

----
| shield (red)
| red
| black (red)
| shield (green)
| green
| black (green)
| shield (blue)
| blue
| black (blue)
| shield (white)
| white
| black (white)
----

For the round connector end I have a copy of a sketch from Donald,

pin#   color-type
---    ----------
1      red
2      red-grnd
3      white
4      ---
5      red-shield
6      white-shield
7      white-grnd
8      green-grnd
9      green-shield
10     blue-shield
11     ---
12     green
13     blue-grnd
14     blue

where shield means the bare drain wire that goes with a pair, and grnd means the
black wire in each pair.

Layout of pins on round connector (they should be labeled on connector):

          3    2    1
        7   6    5    4
       11  10    9    8
         14   13   12